采用液晶觸控面板，可以自由設定烘干程序。同時可手動、自動、中控運行模式，配合穿輸機可以和洗滌龍配套使用、使用范圍更大、工作效率更高。

工作壓力在0.6- 0.7 Mpa烘干速度倍增，頂部大面積銅質熱交換器，從上而下的熱循環與大通道引風系統，使烘干升溫快，熱效率高。配置獨立冷風通道，快捷出料。

12.7mm 的方形沖孔，使內筒開口率達到65%，提高通風效率烘干速度更快。（12mm的圓形沖孔，內筒開口率達50%）。自動出料，降低勞動強度，可以配套使用運輸線，節省搬運時間，提高工作效率。

外殼箱體由優質碳鋼板焊接而成，經噴沙、除銹處理、噴涂節能保溫涂層，光滑耐磨，堅固耐腐蝕。

烘干機支持地腳需根據用戶需求訂做，常規為300mm。


PLC control system,Large liquid touch panel, Automatic Pre types drying program available.
2、The inner drum adopts non shaft drive constructure .Running not only very accurate but also quiet and stable.Positive and negative two-way rotation as well.
3、Inner drum adopts square punching design, improve the punching rate, shorten the drying time
4、Inner drum adopts 6 muddler design. Improve clothes grass rotary rate.assured drying circulation more stable.
5、Adopt big power heater design.Heating more fast and efficient.
hierarchical design lower the maintenance cost.
6、Steam pressure of inner drum range is 0.6- 0.7 Mpa；
7、Patent hot air flow design make hot air in inner drum more and longer, Realize heating utilization, shorten the drying time and reduce the usage cost











采用液晶觸控面板，可以自由設定烘干程序。同時可手動、自動、中控運行模式，配合穿輸機可以和洗滌龍配套使用、使用范圍更大、工作效率更高。

工作壓力在0.6- 0.7 Mpa烘干速度倍增，頂部大面積銅質熱交換器，從上而下的熱循環與大通道引風系統，使烘干升溫快，熱效率高。配置獨立冷風通道，快捷出料。

12.7mm 的方形沖孔，使內筒開口率達到65%，提高通風效率烘干速度更快。（12mm的圓形沖孔，內筒開口率達50%）。自動出料，降低勞動強度，可以配套使用運輸線，節省搬運時間，提高工作效率。

外殼箱體由優質碳鋼板焊接而成，經噴沙、除銹處理、噴涂節能保溫涂層，光滑耐磨，堅固耐腐蝕。

烘干機支持地腳需根據用戶需求訂做，常規為300mm。


PLC control system,Large liquid touch panel, Automatic Pre types drying program available.
2、The inner drum adopts non shaft drive constructure .Running not only very accurate but also quiet and stable.Positive and negative two-way rotation as well.
3、Inner drum adopts square punching design, improve the punching rate, shorten the drying time
4、Inner drum adopts 6 muddler design. Improve clothes grass rotary rate.assured drying circulation more stable.
5、Adopt big power heater design.Heating more fast and efficient.
hierarchical design lower the maintenance cost.
6、Steam pressure of inner drum range is 0.6- 0.7 Mpa；
7、Patent hot air flow design make hot air in inner drum more and longer, Realize heating utilization, shorten the drying time and reduce the usage cost











采用液晶觸控面板，可以自由設定烘干程序。同時可手動、自動、中控運行模式，配合穿輸機可以和洗滌龍配套使用、使用范圍更大、工作效率更高。

工作壓力在0.6- 0.7 Mpa烘干速度倍增，頂部大面積銅質熱交換器，從上而下的熱循環與大通道引風系統，使烘干升溫快，熱效率高。配置獨立冷風通道，快捷出料。

12.7mm 的方形沖孔，使內筒開口率達到65%，提高通風效率烘干速度更快。（12mm的圓形沖孔，內筒開口率達50%）。自動出料，降低勞動強度，可以配套使用運輸線，節省搬運時間，提高工作效率。

外殼箱體由優質碳鋼板焊接而成，經噴沙、除銹處理、噴涂節能保溫涂層，光滑耐磨，堅固耐腐蝕。

烘干機支持地腳需根據用戶需求訂做，常規為300mm。


PLC control system,Large liquid touch panel, Automatic Pre types drying program available.
2、The inner drum adopts non shaft drive constructure .Running not only very accurate but also quiet and stable.Positive and negative two-way rotation as well.
3、Inner drum adopts square punching design, improve the punching rate, shorten the drying time
4、Inner drum adopts 6 muddler design. Improve clothes grass rotary rate.assured drying circulation more stable.
5、Adopt big power heater design.Heating more fast and efficient.
hierarchical design lower the maintenance cost.
6、Steam pressure of inner drum range is 0.6- 0.7 Mpa；
7、Patent hot air flow design make hot air in inner drum more and longer, Realize heating utilization, shorten the drying time and reduce the usage cost












采用液晶觸控面板，可以自由設定烘干程序。同時可手動、自動、中控運行模式，配合穿輸機可以和洗滌龍配套使用、使用范圍更大、工作效率更高。

工作壓力在0.6- 0.7 Mpa烘干速度倍增，頂部大面積銅質熱交換器，從上而下的熱循環與大通道引風系統，使烘干升溫快，熱效率高。配置獨立冷風通道，快捷出料。

12.7mm 的方形沖孔，使內筒開口率達到65%，提高通風效率烘干速度更快。（12mm的圓形沖孔，內筒開口率達50%）。自動出料，降低勞動強度，可以配套使用運輸線，節省搬運時間，提高工作效率。

外殼箱體由優質碳鋼板焊接而成，經噴沙、除銹處理、噴涂節能保溫涂層，光滑耐磨，堅固耐腐蝕。

烘干機支持地腳需根據用戶需求訂做，常規為300mm。


PLC control system,Large liquid touch panel, Automatic Pre types drying program available.
2、The inner drum adopts non shaft drive constructure .Running not only very accurate but also quiet and stable.Positive and negative two-way rotation as well.
3、Inner drum adopts square punching design, improve the punching rate, shorten the drying time
4、Inner drum adopts 6 muddler design. Improve clothes grass rotary rate.assured drying circulation more stable.
5、Adopt big power heater design.Heating more fast and efficient.
hierarchical design lower the maintenance cost.
6、Steam pressure of inner drum range is 0.6- 0.7 Mpa；
7、Patent hot air flow design make hot air in inner drum more and longer, Realize heating utilization, shorten the drying time and reduce the usage cost






采用液晶觸控面板，可以自由設定烘干程序。同時可手動、自動、中控運行模式，配合穿輸機可以和洗滌龍配套使用、使用范圍更大、工作效率更高。

工作壓力在0.6- 0.7 Mpa烘干速度倍增，頂部大面積銅質熱交換器，從上而下的熱循環與大通道引風系統，使烘干升溫快，熱效率高。配置獨立冷風通道，快捷出料。

12.7mm 的方形沖孔，使內筒開口率達到65%，提高通風效率烘干速度更快。（12mm的圓形沖孔，內筒開口率達50%）。自動出料，降低勞動強度，可以配套使用運輸線，節省搬運時間，提高工作效率。

外殼箱體由優質碳鋼板焊接而成，經噴沙、除銹處理、噴涂節能保溫涂層，光滑耐磨，堅固耐腐蝕。

烘干機支持地腳需根據用戶需求訂做，常規為300mm。


PLC control system,Large liquid touch panel, Automatic Pre types drying program available.
2、The inner drum adopts non shaft drive constructure .Running not only very accurate but also quiet and stable.Positive and negative two-way rotation as well.
3、Inner drum adopts square punching design, improve the punching rate, shorten the drying time
4、Inner drum adopts 6 muddler design. Improve clothes grass rotary rate.assured drying circulation more stable.
5、Adopt big power heater design.Heating more fast and efficient.
hierarchical design lower the maintenance cost.
6、Steam pressure of inner drum range is 0.6- 0.7 Mpa；
7、Patent hot air flow design make hot air in inner drum more and longer, Realize heating utilization, shorten the drying time and reduce the usage cost